Chicken thighs are forgiving, but they are not infinitely forgiving. Put them directly over a fierce charcoal fire and the skin can blacken while the meat near the bone still needs more cooking. This is an awkward time to discover that appearance and achievement are different things.
My preferred plan, at least on paper, is a two-zone fire: charcoal on one side of the barbecue, no charcoal on the other. The hot side provides direct heat for browning. The cooler side cooks the chicken more gently with the lid on. You can move the food between them instead of trying to negotiate with every individual coal.
The goal is to cook bone-in chicken thighs on a kettle-style charcoal barbecue, then check that the thickest part has reached 75°C. This is a general method, not a report of a tested cook. Your barbecue, fuel and weather will affect the timing, so the thermometer gets the final vote.
What you need
- A kettle-style charcoal barbecue with a lid and adjustable air vents.
- Charcoal or briquettes suitable for your barbecue, plus a safe way to light them. A chimney starter is useful but not essential.
- Heat-resistant gloves and long barbecue tongs.
- A food thermometer with a probe suitable for checking chicken.
- Bone-in chicken thighs, a little oil, and seasoning of your choice.
- Separate clean plates or utensils for raw and cooked chicken, or a way to wash them thoroughly between uses.
Check the barbecue and fuel instructions before starting. The amount of charcoal is a site-specific variable: it depends on the size of the kettle and the fuel. For this method, start with enough lit fuel to make a modest bed on one side of the charcoal grate rather than filling the whole base. There is no magic briquette count hiding in the shed.
1. Choose a safe cooking spot
Set the barbecue outdoors on a stable, non-combustible surface, away from buildings, overhangs and anything else that could catch fire. Never use charcoal in a house, garage or other enclosed space. Charcoal produces carbon monoxide, including while it is still cooling.
Clear the cooking and charcoal grates of excessive ash and old debris once everything is cold. Ash can obstruct airflow, and airflow is what keeps the fire from becoming a sulky pile of grey gravel.
2. Light the charcoal
Open the vents and light the charcoal using the method recommended for your barbecue and fuel. If you have a chimney starter, follow its instructions and place it on a suitable heatproof surface. Do not use petrol or other improvised liquid accelerants.
Wait until the charcoal is properly lit before arranging it. The pieces should be glowing, with a coating of ash developing on the outside. Use heat-resistant gloves and suitable tools when handling the starter or moving hot fuel.
The exact lighting time varies with the fuel and conditions. Treat a clock as a reminder to look, not as proof that the fire is ready.
3. Make the two zones
Carefully arrange the lit charcoal on one side of the charcoal grate. Leave the other side without charcoal beneath it. Put the cooking grate in place and close the lid for a few minutes so the grate can heat up.
The side over the coals is the direct zone. The empty side is the indirect zone. Indirect does not mean cold: hot air still circulates under the lid, but the chicken is not sitting immediately above the fire.
Keep the vents open enough for the charcoal to burn. If your lid vent can be positioned over the indirect side, that is a useful starting position for drawing heat across the food. Vent settings are another site-specific variable, not a universal configuration. Adjust gradually if the fire is struggling or the barbecue is getting much hotter than you want, and consult the manufacturer’s instructions for your model.
4. Prepare and place the chicken
While the grate heats, lightly oil and season the thighs. Keep raw chicken and its juices away from food that will be eaten without further cooking. Wash your hands and any surfaces or utensils that have contacted the raw chicken before using them for cooked food.
Place the thighs on the indirect side, leaving a little space between them, and close the lid. Keep them clear of the edge directly above the coals. This gives the inside time to cook without exposing the outside to the fiercest heat for the entire session.
Resist the urge to lift the lid every couple of minutes. Each inspection changes the heat and airflow, and the chicken is unlikely to offer a progress report. Check periodically instead, and turn the pieces if they are browning unevenly.
5. Check the temperature and finish the skin
Use the food thermometer to check the thickest part of each thigh, keeping the probe away from bone. Clean the probe between checks as appropriate, particularly before it touches food that is ready to serve.
When the chicken is getting close to done, you can move it briefly to the direct side to improve the colour and crisp the skin. Watch it closely and turn it as needed. Dripping fat can cause flare-ups, so move a piece back to the indirect side if flames start licking it. Close the lid rather than trying to defeat flames with enthusiasm.
Before serving, check every thigh again. The thickest part needs to reach 75°C. If a piece has not reached that temperature, return it to the indirect zone and continue cooking before checking again. Transfer finished chicken to a clean plate, not the one that held it raw.
How to test the setup
The useful test has two parts. First, look at the fire: there should be a clear area of the cooking grate with no charcoal directly underneath it. If the coals have spread across the base, carefully rearrange them with a suitable tool.
Second, test the food rather than guessing from its colour. Check each thigh with the thermometer in its thickest section. Different-sized pieces can finish at different times, so remove those that are ready and keep cooking the rest. A nicely browned exterior is not a substitute for a temperature reading.
Troubleshooting
The outside is darkening too quickly
Move the chicken farther from the coals and keep it on the indirect side. Check that the fuel has not spread underneath it. If you are using a sugary sauce, leave it until late in the cook or serve it separately; sugar can darken quickly over heat.
The charcoal is fading
Check that ash is not blocking the vents and that the vents are open sufficiently. Wind, fuel type and the amount of charcoal can all affect the fire. If you need to add fuel, follow the barbecue and fuel instructions, and use tools rather than bare hands.
The thermometer readings vary
Check the thickest part again, making sure the probe is not touching bone or poking through the meat. If a thigh has several thick sections, check more than one spot. When in doubt, keep cooking and recheck rather than promoting the most flattering number.
The fire flares when the chicken goes over it
Move the chicken back to the indirect side and close the lid. Give the flare-up time to subside before attempting a shorter finish over direct heat. You can also skip that finish: chicken cooked to a safe temperature is more useful than a dramatic rescue operation.
What is still unverified
No particular kettle model, charcoal brand, vent setting or cooking time has been tested for this article. The amount of fuel and the time required will change with your equipment, the size of the thighs and the conditions outside. Start modestly, observe the fire, and use the thermometer to decide when the chicken is ready.
When you are finished, close the vents as directed by your barbecue’s instructions and let the coals cool completely before dealing with the ash. The fire may look finished before it actually is, which is a surprisingly common problem in both barbecuing and software projects.