Batteries: What’s here versus what we need Solving two battery challenges

one for the electric grid, one for cars.

We mostly think of batteries in terms of gadgets like phones and laptops. Although we’d all love lighter weight, higher capacity, and faster charging for our gadgets, progress for this type of battery has for the most part already made huge strides. The modern battery is largely keeping pace with our needs.

But two other big potential users of batteries—the electric grid and automobiles—haven’t really found the better technology they need. Based on a panel discussion at this year’s meeting of the American Association for the Advancement of Science, that’s more of a challenge than it sounds, since the two battery uses need very different things.

What the grid needs

The grid perspective was handled by Haresh Kamath of the Electric Power Research Institute. He began his talk by noting that the whole purpose of the grid is to let you disconnect the generation of power from its use in space, letting people take advantage of efficiencies of scale and location. Energy storage does the same thing but across time, allowing power to be generated when it’s cheapest and then used as needed.

So far, however, storage has meant pumped hydropower or compressed air, both of which require specific geologies to make sense. On the other hand, batteries can go pretty much anywhere and perform a variety of functions beyond simply holding onto electricity for future use. They can help regulate the grid’s frequency, and their distributed nature can help with stability in cases of equipment failure. But since the grid hasn’t historically had much storage, these factors are treated as intangibles and priced accordingly.

That situation is starting to change as a regulatory structure is put in place and states begin to consider mandating a certain level of utility-grade storage. Notably, California now has a mandate for 1.3GW·h of storage.

The challenge will be that very few of the battery technologies available in mass quantities offer what the utilities need: “Utilities want 15-20 year life spans and minimal maintenance,” Kamath said. And they have to deliver that at a price of about $500 per kilowatt-hour (kW·h) to make economic sense. This only works if the intangibles Kamath mentioned are actually given a price. Lithium batteries are only getting close to being there price wise, but they don’t offer the durability the utilities need.

What the automakers need

What lithium batteries do have is a relatively low weight for the energy they store, which fits the needs of a different market—cars. GM’s director of fuel cell research, Mark Mathias, was in attendance to speak for the automakers. His field might seem like an odd match for batteries, but it’s more relevant than you might think. “In our mind, fuel cell vehicles are electric vehicles,” Matthias said. “In this case, you’re just making the electricity on the vehicle.” And if you’re making an electric vehicle, you have to decide when it makes sense to generate that electricity, or when it’s better to store it.

In some ways, Mathias suggested, current lithium batteries are doing pretty well. He noted that plug-in hybrids are already ahead of where the Prius was at this point in its history, and he referred to the “surprise” of what Tesla could accomplish at the high end.

Read the rest of the article here:http://arstechnica.com/science/2014/03/batteries-whats-here-versus-what-we-need/

I take no credit for this article but endorse ARSTechnica.com

Scientists revive largest virus yet from 30,000-year-old permafrost

Up until recently, the line between viruses and cells seemed pretty simple: cells were big and carried everything they needed to live and grow. Viruses were tiny and only carried the genes they needed to take over their host cells; they relied on their hosts for most essential proteins.

That line got a bit blurry as we found parasitic and symbiotic cells with very stripped-down, minimalist genomes that wouldn’t let them survive outside their hosts. But it’s nearly been obliterated by the discovery of giant viruses—some of these have genomes that are larger than those of bacteria and carry many of the genes needed to copy DNA and translate it into proteins.

Scientists have now identified yet another giant virus, this time using a technique that sounds like it’s straight out of a sci-fi horror flick: they thawed some 30,000-year-old permafrost and allowed any viruses present to infect some cells. Fortunately, the cells were amoebas, and this virus is overwhelmingly unlikely to present a threat to human health. But the fact that viruses could apparently survive so many centuries in the Siberian permafrost does lead the authors to suggest that the melting Arctic may pose an emerging disease risk.

The rest of the article:
http://arstechnica.com/science/2014/03/scientists-revive-largest-virus-yet-from-30000-year-old-permafrost/

I take no credit for this article but endorse ArsTechnica.com.

Migrate Your WordPress to Turnkey-WordPress

So, today I had decided to try out TurnKey linux to run my wordpress instead of the traditional ubuntu + all the manual components to a simple, out of the box solution that could be run as a virtual machine with a readily prepped linux environment.

Getting the machine going is a breeze, a quick tutorial may be found here:

About 5 minutes – pretty straight forward to setup.

Seeing this blogpost is going to be hindsight for me and informative for you, I would also recommend using VMWare Workstation for the snapshots, I took one once I had a clean VM with all the patches and such.

If you have only been needing a clean install, you can stop reading here but if your are upgrading, the following steps will save you a bit of googling.

First of all you will need to export your original posts which can be found from your tools > export of your original worpress.org site.

Next up, we will assume you have already gotten your site up and running if you followed the guide above because you will need to re-import it into your new site. This you will do after logging into your new wp-admin. Below are a few considerations which should be tackled in the following order:

  1. Login – and create yourself a new user – this user will be used to take ownership of your posts in your NEW blog.
  2. When importing, WP will ask you to download a the WordPress importer; do it!
  3. Once imported you will need to alter your wp-config.php, please also note the location and how I modified it.
    Turnkey offers a nice/lazy way of editing your config files. This can be found at https://wp-ip-address:12321 then navigate to your Tools then File manager.
    Modify the following few fields withing the php file. wp-config
  4. Ok, we are halfway there. Now to change two fields into on your database, logon to your php myadmin using https://wp-ip-address:12321, select your wordpress database from your drag-down box. and open your wp_options table. Here you will need to change two fields; home AND site url to incorporate reflect your new site.
    siteurl
  5. Probably the most important issue I have faced is getting the <a href> of the pictures pointing towards the external facing site and not the internal ip address of the server. to address that, a little hunting around gave me the following SQL query I ran on the website instead of doing it manually.
    You can tun the following update by clicking on SQL on your MyPHP:
    UPDATE wp_posts set post_content=REPLACE(post_content, ‘192.168.2.225/’, ‘www.georgeene.com/’)

And – Voila and welcome to your new wordpress block running on next to no resources and is FAST given the apace + debian back-end.